SPXFLOW LIGHTNIN
Choice of motors: Select the motor that’s consistent with your specific plant standards. A wide variety of motor options is available, including explosion-proof and multiple-speed units.
Longer shaft lengths accommodate a wider range of tank configurations: Carbon steel or 316 stainless steel shafts are standard. Shafts in excess of 9 meters (30 feet) in length let you specify Series10 mixers for large tanks without the need for steady bearings. High alloy and composite shafts are also available. Unique output shaft connection reduces shaft deflection to extend seal life.
Choice of mechanical seals: Closed-tank mixer s can be equipped with dry-running single mechanical seals or lubricated double mechanical seals for hazardous materials and higher-pressure applications.
Compact design with fewer parts for easy installation and maintenance.
Leak-proof reducer design.
Optional seal pedestal design eliminates temperature constraints: Series 10 mixers can be mounted on a pedestal to permit operation up to vessel temperatures of 204° C (400° F).
Dry-well construction and no submerged seals prevent oil leakage: An integral reducer housing with dry well construction prevents oil loss, as well as the risk of product contamination. The reducers simply can’t leak; even when the mixer is mounted on angle risers. In addition, the absence of submerged oil seals or split lines below the oil level prevent leakage over the tank or into the product. Check, add or change oil without removing the safety guard.
International Legislation: Lightnin Series 10 can be built and certified to meet the requirements of CE, ATEX, PED, GOST, RTN (including technical passports), NORSOK, VIK and DNV DRILL(N), as well as other certifications that might be required.
1. UNMATCHED DURABILITY
Long gear and bearing life: The largest tapered roller bearings in a mixer of this class help produce an L10 life of 100,000 hours and greater. Designed specifically for mixer service, Series 10 speed reducers are capable of handling large variations in mixer loads, adapting to different process conditions and accommodating long overhung shafts. “Off-the-shelf” speed reducers not designed for mixer service can’t make this claim. In addition, high-quality carburized and ground gearing features a minimum AGMA Service Factor of 1.5 for long life and added protection against shock loading.
Unique output shaft connection: The largest of any competitive unit - reduces shaft deflection to extend seal life: Greater mechanical stiffness reduces deflection at the seal (less than 0.26mm / 0.010 inches) compared with seal-on-a-sleeve or cartridge designs. As a result, you’ll be able to specify longer overhung shafts and replace seals less frequently. When servicing is called for, there is no output shaft seal on any mixer in the world that’s quicker (30 minutes or less) or easier to replace.
2. EXCELLENT VERSATILITY
Wide range of output speeds: Select the combination of output speed and torque that meets your mixing requirements. Output speeds from 9rpm to 125rpm; 0.75kW to 22kW (1hp to 30hp).